Dual machine linkage bending machine
Service Hotline: 0513-88212468
(Dual machine linkage WC67K-400T/1000)
(Dual machine linkage WC67K-800T/12000)
(Dual machine linkage WC67K-400T/12000)
Introduction to dual machine linkage bending machine
Its structure mainly includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket, and the worktable consists of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base consists of a seat shell, a coil, and a cover plate. The coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate.
Product features of dual machine linkage bending machine
Select two WC67K or WE67K series hosts of the same specifications, and configure a dual machine linkage synchronization device.
Two machine tools can be linked to process extra long workpieces.
Two machine tools can also be used separately at the same time to improve production efficiency, equipped with a deflection compensation mechanism.
The synchronization mechanism adopts mechanical hydraulic servo and mechanical stopper.
The stroke of the upper slider and the position of the rear stop material rack are adjusted quickly by motorized means, with manual fine-tuning and electronic numerical control display.
